Generator set featuring a robust engine and control panel, designed for reliable power generation in various applications.

12kW Diesel Generator on slide rack

The PTK-12-MIL-HI generator, tailored specifically to meet the power requirements of military operations, notably within the compact confines of the S-788 Humvee-mounted shelter.

Compact green power generator with control panel and ventilation grill, designed for rugged environments.

10 KW DIESEL TRAPEZOID GENERATOR

The PTK-10-TRAP generator was designed to meet the unique challenges posed by the cramped confines of military scout vehicles.

Power Tech PTK-12ENC portable generator with black casing and wheels, designed for mobility and efficiency.

12 KW DIESEL GENERATOR WITH TANK AND WHEELS

Focused on portability, quick assembly, and ease of use, this project highlights the importance of responsive solutions in emergency situations.

Specialty Vehicle Generator Specifications

What OEMs Should Define Before Requesting A Quote

A generator quote is only as useful as the information behind it. Two specialty vehicles can need the same nominal power output and still require very different generator configurations, installation layouts, and operating plans.

For an OEM building a mobile clinic, command vehicle, food service truck, or specialty trailer, the purchasing process should begin with a clear specification. That document helps the vehicle builder and generator manufacturer evaluate the same requirements before equipment is selected and compartment dimensions become difficult to change.

This guide focuses on what to include in that specification, who should provide the information, and what to resolve before approving a generator for production.

Start With the Vehicle’s Mission

“Power a mobile medical vehicle” describes a market. It does not describe a complete operating requirement.

A more useful brief explains where the vehicle will work, how long it will remain deployed, which systems must operate during a normal day, and what happens when power is unavailable.

For example, describe whether a command vehicle will support short planned events, extended emergency deployments, or both. Identify whether a mobile clinic will visit locations with dependable shore power or operate independently for most appointments.

Include the anticipated daily operating schedule and any important differences between seasonal use and year round service. Ask the end user to review this section. Purchasing, engineering, and operations teams sometimes have different assumptions about how a vehicle will actually be used.

Submit an Equipment Schedule With Supporting Data

An equipment list should do more than name the appliances. Collect the voltage, phase, frequency, running demand, and available starting or transient load information for each major device. Record the source of each figure so the engineering team can distinguish manufacturer data from an estimate.

Identify equipment that will operate together. A list of every installed device does not automatically describe the demand at any particular moment.

Mark proposed future additions separately. This allows the manufacturer to review realistic expansion needs without treating every possible upgrade as an immediate requirement.

PowerTech’s guide to sizing a generator for your equipment provides background for this discussion. The final selection should be reviewed against the actual equipment and operating conditions.

Define Operating Scenarios Before Choosing Capacity

Give the generator manufacturer several representative operating scenarios rather than a single total wattage figure.

For a mobile clinic, those scenarios might include morning startup, patient appointments, and end of day cleaning. For a command vehicle, they might include basic communications duty and a fully staffed deployment.

For each scenario, identify which major loads are already running and which equipment may start next. Ask whether load sequencing is acceptable to the operator. A proposed operating strategy has little value if the crew cannot practically follow it.

This exercise also reveals questions that belong with equipment suppliers. If a device has specific power quality or interruption limits, obtain those requirements directly from its manufacturer.

Provide Drawings That Show More Than the Empty Compartment

A compartment’s length, width, and height are a starting point. The installation review should also show adjacent components, access doors, structural members, proposed mounting locations, and the routes available for connections.

Supply dimensioned drawings and identify which dimensions are fixed. If the compartment can still change, say so. A manufacturer can evaluate options more effectively when the design team distinguishes a firm constraint from a preliminary preference.

Include planned service access in the drawings. Ask how a technician will reach routine maintenance points, remove service components, and eventually remove the generator itself. An access door that exposes the unit does not necessarily provide room to work.

PowerTech’s customization capabilities are relevant when standard packaging does not align with a vehicle’s layout.

Assign Responsibility for Cooling and Exhaust Integration

The specification should identify who will design, review, and approve the installed cooling airflow and exhaust arrangements.

Give the manufacturer the proposed intake and discharge locations, surrounding bodywork, and expected environmental conditions. Include deployed equipment that could affect these areas, such as steps, storage doors, or other vehicle accessories.

Request the installation requirements for the proposed generator configuration before finalizing the body design. Compartment openings and airflow paths should be evaluated as part of the installed system.

PowerTech’s article on airflow in generator performance explains why cooling deserves early attention.

Treat exhaust routing as a separate installation responsibility. Have qualified professionals review the design for the specific vehicle, including occupied areas, openings, and applicable requirements. A generic drawing should not substitute for that review.

Describe Fuel and Electrical Interfaces

State the proposed fuel source and whether the generator will use a dedicated tank or an approved connection to the vehicle’s fuel system. Identify who is responsible for the tank, lines, connections, and installation approval.

PowerTech offers gasoline generators as well as diesel options. Fuel selection should be evaluated against the vehicle’s operating plan and available configurations.

For the electrical interface, document the required output and explain how the generator will connect to the vehicle’s distribution system. Identify shore power, batteries, inverters, or other sources that must be coordinated.

Assign responsibility for transfer equipment, protection, grounding and bonding, and final electrical verification. The generator supplier and vehicle electrical designer should resolve interface questions before production wiring begins.

Turn Preferences Into Reviewable Acceptance Criteria

Words such as “quiet,” “compact,” and “easy to service” can mean different things to different project stakeholders.

Translate those preferences into requirements the team can evaluate. Specify the available installation envelope. Identify the service tasks that must be possible through the planned access opening. If the project has a sound target, define how and under what conditions it will be assessed.

Do the same for operator controls. Explain where the operator will start and stop the generator, which information must be visible, and whether any proposed remote interface requires additional review.

A clear acceptance criterion makes disagreements easier to resolve before delivery.

Agree on the First Vehicle Review

For a repeat vehicle program, the first installation deserves a documented review before the configuration becomes the production standard.

Agree in advance on the operating scenarios to demonstrate, the measurements to record, and the people responsible for addressing findings. The review should consider the installed vehicle with its intended equipment operating.

Capture approved drawings, generator configuration details, and any installation changes in the production record. Decide how later equipment substitutions will trigger another engineering review. A replacement appliance may change requirements even when it occupies the same space.

This process creates a useful reference for purchasing, assembly, service, and future vehicle builds.

Bring PowerTech Into the Specification Process

PowerTech designs and assembles custom gas and diesel generators for specialty vehicle applications. Its product range and customization resources give vehicle builders a starting point for discussing power requirements and installation constraints.

Before requesting a quote, assemble your operating brief, equipment schedule, available drawings, and unresolved questions. An incomplete specification can still start a productive conversation when the missing information is clearly identified.

Explore PowerTech’s mobile generator lineup and connect with the team through PowerTech Generators to discuss your next vehicle program.

Frequently Asked Questions

When should an OEM involve the generator manufacturer?

During preliminary vehicle design, while equipment selections and compartment layouts can still be reviewed. Early discussions help identify missing information before the builder commits to a final configuration.

What information is most useful for an initial generator quote?

Provide the vehicle’s mission, expected operating schedule, equipment electrical data, proposed fuel source, required output, and available installation dimensions. Identify estimates and unresolved requirements.

Can the same generator specification be used for every vehicle in a fleet?

It can serve as a starting point when the vehicles share a validated configuration. Changes to equipment, layout, operating conditions, or deployment requirements should trigger a review.

Should future equipment be included in generator sizing?

Document planned additions and distinguish them from speculative upgrades. Ask the manufacturer to evaluate the present load and credible future scenarios together.

Does selecting a generator complete the vehicle’s power system design?

No. Installation, cooling, exhaust, fuel delivery, distribution, controls, and any additional power sources require coordinated design and review.